Make every room a source of inspiration.
4-Ounce Flexible Foam-Cure Adhesive is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, Foam-Cure can be applied to one piece and after the two are joined, they can then be pulled apart.
After letting it air dry for about ten minutes, Foam-Cure will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours.
Foam-Cure works with all foams, and will actually bond most other materials. It will bond wood and plastic to foam, and is a good canopy glue. Foam-Cure does not, however, cure flexible enough to act as a hinge for aircraft control surfaces. Its limitations occur when bonding large areas of two non-porous materials. Foam-Cure requires exposure to air for drying. If one tried to bond, for example, a half-dollar coin to glass, over 90% of the adhesive would never cure, since the solvent it contains would have no where to evaporate.
Net Weight: 4-Ounces