Industrial-Style Message Station
This industrial-chic message station may look like it requires a trip to the hardware store. But you’ll actually find everything you need—pipes and fittings, curtain rods and kraft paper—at Hobby Lobby. And you’ll find the step-by-step instructions right here.
Project Instructions
-
Step 1
Screw pieces together as shown and repeat for other side. Screw both sets into wall.
-
Step 2
To mount paper roll, unscrew one 12” pipe from elbow. Place roll onto other 12” pipe, then insert unscrewed 12” pipe into roll and re-screw onto elbow.
-
Step 3
Attach curtain rod hardware to wall—under paper roll at top and another set near bottom of paper edge. Place rods in brackets.
-
Items You Will Need
Quantities shown below are recommended
